Trunnion Mounted Ball Valve NPS 2-56

Trunnion Mounted Ball Valve

Specifications
It is widely used in pipeline system as efficient stop valves with flow in either direction as well for throttling service.
Features
1. Two or Three-piece body design
2. Double block and bleed or automatic pressure release in body chamber
3. Trunnion supported design reduces operating torque
4. Two sets of O-rings plus firesafe stem packing prevents leakage
5. Corrosion resistant low friction bearings
6.17-4pH or Inconel seat springs
7. Sealant injection fittings for emergency stem or seal sealing
8. Direct mount topworks pad for actuator or gear operator
9.8" & larger valves are equipped with lifting lugs
10. Locking device (lock not included)
11. NACE MR0175 (Superseded by ISO 15156)
12. Anti-blowout trunnion stem design

Standards
These valves comply with the applicable requirements of the following standards:
Design and manufacture: API6D, BS5351, API608, ASME 16.34
Face to face(end to end): ASME B16.10/API6D
Flange connection: ASME B16.5, 26"-60" to ASME B16.47 or to API605 on request
Test and inspection: API598/API6D

Produce Ability
Size: NPS 2"-56"
Pressue: Class 150-2500
Material: WCA, WCB, WCC, WC1, WC5, WC6, WC9, C5, C12A, CA15, LCB, LCC, CF8, CF8M, CF3, CF3M, CF8C